Home
Products
New Products
Careers
Services
Contact

Sterile Service Department
Transfer Hatches
Transfer Trolleys
Autoclave Furniture and Containers
Powered and Gravity Conveyors
Packing and Inspection Tables
Other Equipment
Autoclave Furniture and Containers
 

Autoclave Loading Trolley
Autoclave Loading Trolley
  
Autoclave Loading Trolley
This standard loading trolley can be used to safely transfer the heaviest loads in any floor standing sterilizer where the use of roll-in and roll-out furniture is used. The only requirement being the addition of a set of chamber rails on which to support the load and secure the trolley.
Constructed from Stainless Steel or powder coated R.H.S. The heavy duty swivel castors give the trolley ease of manoeuvrability and many years trouble free service. 		 
 

Parking Bay
Parking Bay
  
Parking Bay
This useful piece of equipment complements both the Easyload and standard transfer andloading systems. By simulating the autoclave chamber rails it can be installed anywhere and used to park the autoclave furniture therefore releasing the loading trolley for use elsewhere.Constructed from 304 Stainless Steel or powder coated RHS both with stainless steel rails.		  
 
 


Autoclave Truck/Racks

Construction specifications
Base Unit: Rigid stainless steel framework with provision to fit extra shelves on 75mm vertical increments.
The base unit is manufactured from stainless steel with several shelf design options including slatted aluminium members, flat stainless steel or Aluminium sheet with round perforations, broad and narrow stainless steel wire mesh.
PTFE rollers are fitted to the base units when used with standard loading trolleys, these are not required when used with the Goldsworth 'Easyload' system.
Shelves: Fabricated from stainless steel with several shelf design options including slatted members, round perforations (aluminium optional), broad and narrow wire mesh.
Each shelf is supplied with a pair of support rods for fitting into the base unit.

  
 


Slatted
  
Slatted
Base Unit: The base shelf is formed by cladding the framework with formed slats, their design provides air space and drainage in each slat.
Shelves: Stainless steel framework clad with formed slats. A condensate deflector can be fitted to each shelf as an optional extra.		  
 


Perforated
 
Perforated
Base Unit: Sstainless steel sheet perforated with swaged holes providing air space and rigidity {(holes on 75mm pitch). The ends and sides of the shelf are all returned upward to provide a tray configuration.
Shelves: Formed from stainless steel sheet and perforated with swaged holes, the ends and sides of the shelf are all returned upwards to provide a tray configuration.
A heavy gauge Aluminium base and shelves with holes on 200mm pitch is available as a alternative.		  
 


Mesh Baskets
  
Mesh Baskets
Basket: A rigid framework constructed from R.H.S. stainless steel and clad with welded mesh panels to produce an enclosure. One side is divided along its length into two sections. The top section can be lifted and hinged down to assist with loading. The base panel is formed from a perforated stainless steel panel.		  
 


Open Wire
  
Open Wire
Base Unit: The base shelf is constructed by inserting three welded mesh panels into the framework producing a large open area.
Shelves: A rigid stainless steel R.H.S. framework in-filled with mesh panels.		  
 
 


Pallet Base
Available in any method of construction and style covered in our comprehensive range of manufactured equipment.

Instrument Tray
Manufactured from heavy gauge anodised aluminium, these trays fully utilise the maximum available chamber space when used with our autoclave furniture.

Standard Tray Dimensions
10cuft 14cuft 21 cuft 28cuft
300x150 300x150 300x150 300x150
300x300 300x280 300x300 300x300
610x150 300x430 300x610 300x610
610x300 610x150 610x150 610x150
Special sizes can be made to customer requirements.

  
 

Discard Box		  
Discard Box
This specially designed box has been developed to provide a safe method of handling and sterilizing laboratory waste. Its unit size, comfortable to manoeuvre even when fully loaded, fully utilises autoclave chamber space and is self-stacking. Manufactured from stainless steel the unique design features a carrying handle, pouring aid and removable trivet and lid. For loads which are prone to stick to the inside walls of the box, the surface can be coated with a P.T.F.E. finish as an optional extra.

The efficiency of the system works by directing steam down the corner ports of the box into the void created by the trivet. The steam then penetrates into the discard through perforated holes in the trivet. The void doubles as a reservoir for any liquid which can be emptied without removing the box contents or lid by pouring via the corner ports.


 

 
Telephone: +44 (0) 1273 516661  Email: head-office@goldsworth.co.uk  Fax: +44 (0) 1273 512695
Home Products New Products Careers Services Contact