Height Adjustable Sinks - Stainless SteelHeight Adjustable Double Bowl Double Drainer Sink

Goldsworth manufacture height adjustable HTM64 compliant single or multiple height adjustable sink units for manual cleaning of both instruments and scopes. Optional washing spray guns can be supplied.

Bespoke stainless steel height adjustable sinks are designed and manufactured in our factory to suit specific applications.

We work closely with our customers to ensure that we produce quality manufactured height adjustable sinks to exactly fit into the available space.

Height Adjustable Sink Units Specifications

  • All Goldsworth height adjustable sinks are fitted with thermostatically controlled HTM & WRAS approved, single leaver, pillar mounted mixer taps for connection to hot & cold water supplies.
  • Goldsworth's height adjustable sinks are specially constructed 240-grit polished 304 stainless steel Sink Unit suitable for the cleaning of dirty instruments and scopes.  
  • Each height adjustable sink unit is manufactured to fit the customers exacting requirements, range includes: single bowl & single drainer, double bowl & double drainer, double bowl & double drainer. 

  • The bases of the bowls are tapered towards the waste outlet, to ensure complete drainage. 

  • Each sink top has raised edges to the sides and front and a 100-mm up-stand to the rear; this is to ensure ‘containing’ liquids.

  • Each bowl is fitted with a 38-mm waste outlet positioned in a rear corner with a high-level weir overflow standpipe approx. 310mm high. 

  • All corners and up-stands are welded. 

  • The weir standpipes have clear litre measurements on them to suit the bowl volume so that the operator is able to ascertain the quantity of liquids in the bowls.

  • Below the height adjustable sink top on is a box frame support assembly, which includes two electrical rams providing height adjustment for the sinks.  This is controlled from one side at the front of the unit and offers approx. +/- 125-mm to the mean height, usually 900mm.  

  • There is a front valance to the height adjustable sink unit extending to below the base of the bowls and this contains a switching mechanism, to remove power and provide an audio warning, should the bar make a positive contact with any intrusion, into the sink operating area.  

  •  A 220v 50Hz spur is required adjacent to the sink positions. (Note: electrics are located to the right of the sink)